Splashback prices
How much does a glass splashback cost? (UK, 2026)
The usual kitchen sizes priced by the same engine our checkout charges from, in 6mm toughened glass, the way every splashback we make is specified. Then what moves the price, and one click to price your own wall.
Prices checked September 2026
Colour chosen: RAL 3020 Traffic red. It does not change the price, and the configurator link below opens with it set. About this colour
Typical sizes
Splashback prices by size
Each price is for one piece of 6mm toughened glass at that size, with arrised edges, inc. VAT at 20% (the ex-VAT figure is underneath). Cut-outs for sockets, the colour and delivery are added in the configurator.
| Size | Clear |
|---|---|
| Behind the hob600 × 750mm | £16.20£13.50 ex. VAT |
| A full run along the worktop3000 × 600mm | £64.80£54.00 ex. VAT |
| Behind the sink900 × 600mm | £19.44£16.20 ex. VAT |
Opens the configurator on the splashback flow: your size, the colour, socket cut-outs and the hob notch, priced live.
What moves the price
The five things that decide a splashback's cost
1
Area
The glass is charged per square metre, so a full run costs more than a hob panel, but proportionally less: small pieces are lifted to a minimum charge.
2
Glass type
Clear float has a faint green edge tint; low-iron glass has none, so whites and pale colours read true. Low-iron carries a higher rate per square metre.
3
Toughening
Every splashback is toughened for the heat behind a hob. It is a per-piece surcharge and it is already inside every price on this page.
4
Cut-outs and notches
Sockets, switches and a hob notch are each a fixed amount, finished before toughening. Give the centres from your electrician's plan.
5
Colour, delivery and fitting
The RAL colour does not change the price. Delivery is by zone at checkout, collection is free, and fitting is a separate service line.
Want to see the colour on your own wall first? The splashback visualiser drops a RAL colour or mirror onto a photo of your kitchen, and the colour library has a page for each of the 70 RAL colours we paint most. Measuring? The measuring pack shows how to record socket centres and the hob notch.
Straight answers
Splashback cost questions
How much does a glass splashback cost per square metre?
The table above is priced from our live rate card for 6mm toughened glass, the thickness a splashback is made in. Divide any cell by its area for the effective rate, and remember a small piece may be lifted to the minimum charge, so the hob size costs more per square metre than the full run.
Why must a splashback be toughened?
Heat. A hob throws enough heat at the wall behind it to crack ordinary annealed glass; toughened glass takes the thermal shock and, if it ever breaks, crumbles rather than shards. Every splashback we make is toughened, which is why the toughening surcharge is already inside every price on this page.
Does the colour change the price?
No. A back-painted splashback is priced as its glass type; the RAL colour you choose in the configurator is not a price line. Low-iron glass costs more than clear because it has no green tint, so pale and white colours read true through it.
What about socket cut-outs and the hob notch?
Each cut-out is a fixed amount added in the configurator, priced before toughening because every hole and notch has to be finished first. Position them from your electrician's socket centres; the measuring pack shows how to record them.
Is fitting or delivery included?
No. The prices are for the glass, collected from the branch. Delivery is priced by zone at checkout, and fitting is a separate service line you can add if you want us to install it.